C2950#configure terminal C2950(config)# C2950(config)#monitor session 1 source interface fastethernet 0/2 C2950(config)#monitor session 1 destination interface fastethernet 0/3
C2950(config)# Type : Local Session Source Ports : Both : Fa1/0/2 Destination Ports : Fa1/0/3 Encapsulation : Native Ingress : Disabled
C2950#configure terminal C2950(config)# C2950(config)#no monitor session 1
http://wiki.netmon.ca/index.php/How_to_set_up_port_spanning_on_Cisco_devices
I didn’t do the swap, just was the wheel man. Used the GTI to transport the torque-less wonder.
[flowplayer src=’http://rogertyree.com/wp-content/uploads/2012/02/The-Silver-Surfer-WEB.m4v’]
In Vag Com:
Address 17 – Instruments
Adaptation 10
Select “Staging” from the drop down list
Select “Active” from the drop down list
Save the changes
Done!
1up –> snobrdrdan
A turbocharger is used to force air/fuel mixture into an engine at a pressure greater then the natural atmospheric pressure of around 14.5 PSI. When a turbo produces 7 PSI of boost, this means how much extra pressure it applies on top of the natural atmospheric pressure. The way a turbo works is the exhaust coming out of the engine is pushed through a turbine. This turbine is mounted on a shaft, which in turn spins an air compressor. The compressor draws air in and blows it into the inlet manifold, and this produces BOOST. The whole point of forcing the air/fuel mixture into an engine is to allow it to burn more fuel and make more power with the same engine capacity. This can get complicated, as there are several factors that get in the way of efficency gain. For one thing when you compress air (with a turbo) it gets hotter. The problem with hotter air is that it contains less oxygen than cooler air, so there is less oxygen to help burn extra fuel that’s going into the engine. This is why many turbocharged cars use “intercooling” of various types, to cool the pressurised air back down into the engine.
Nook Color + Cyanogen 7.1 + Zoodles = Perfect Kid Tablet
You will need the following things:
Type cleanmgr /d c: /sageset:100 in the RUN box. The Disk Cleanup dialog box appears. Check the items you want to clean every time you run this process, for example Recycle Bin, Temporary Internet Files, Old Chkdsk files and then click on OK.
Create a new shortcut in your Windows folder using cleanmgr /sagerun:100 as the command line. Name it as CleanupTask.
Each of the Sageset configurations are stored in the following registry key and sub-keys:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \VolumeCaches
SSL-Explorer is a nice user-friendly VPN app that only needs java and a web browser on the client to run. It is thus a LOT easier to get users onto it, as it requires no software to configure and run, the only thing they may need to do is install the latest jdk version. This howto describes how to install on Ubuntu 6.0.6 LTS (server version), but will work on [insert your distro here] with a couple of modifications (most likely just package management and package names). (more…)
You can launch IE7 into Kiosk mode by adding a switch to a command line command!
Click Windows Key+R
Type:
iexplore -k
Click OK
Found this on the internets.
There were a couple of variants on the plist file method in the original hint. Below is the one that worked for me. Other variants failed or gave me problems, but the below has been happily doing its job since 10.3.0 all the way up to the present.
(The followng pasted in a file called autodiskmount.plist in my /Library/Preferences/SystemConfiguration folder.)
<?xml version=”1.0″ encoding=”UTF-8″?>
<!DOCTYPE plist PUBLIC “-//Apple Computer//DTD PLIST 1.0//EN” “http://www.apple.com/DTDs/PropertyList-1.0.dtd”>
<plist version=”1.0″>
<dict>
<key>AutomountDisksWithoutUserLogin</key>
<true/>
</dict>
</plist>
